Henry Ford：My Life and Work, Excerpt 43

He found eventually that it was a French steel and that there was vanadium in it. We tried every steel maker in America--not one could make vanadium steel. I sent to England for a man who understood how to make the steel commercially. The next thing was to get a plant to turn it out. That was another problem. Vanadium requires 3,000 degrees Fahrenheit. The ordinary furnace could not go beyond 2,700 degrees. I found a small steel company in Canton, Ohio. I offered to guarantee them against loss if they would run a heat for us. They agreed. The first heat was a failure. Very little vanadium remained in the steel. I had them try again, and the second time the steel came through. Until then we had been forced to be satisfied with steel running between 60,000 and 70,000 pounds tensile strength. With vanadium, the strength went up to 170,000 pounds.

Source： https://www.gutenberg.org/ebooks/7213
Locator：Chapter IV, excerpt 43 · Verified：2026-10-19 · Verification：Short excerpt

This is a direct reading: the original and source are kept; commentary will be added later.

公版传记；原文逐字取自 Project Gutenberg，仅摘录段落并附全书链接。

This text is in the public domain. The edition and source link are above. Copyright

← Back to the library