Henry Ford：My Life and Work, Additional Excerpt 32

In 1879--that is, about four years after I first saw that Nichols-Shepard machine--I managed to get a chance to run one and when my apprenticeship was over I worked with a local representative of the Westinghouse Company of Schenectady as an expert in the setting up and repair of their road engines. The engine they put out was much the same as the Nichols-Shepard engine excepting that the engine was up in front, the boiler in the rear, and the power was applied to the back wheels by a belt. They could make twelve miles an hour on the road even though the self-propelling feature was only an incident of the construction. They were sometimes used as tractors to pull heavy loads and, if the owner also happened to be in the threshing-machine business, he hitched his threshing machine and other paraphernalia to the engine in moving from farm to farm. What bothered me was the weight and the cost. They weighed a couple of tons and were far too expensive to be owned by other than a farmer with a great deal of land. They were mostly employed by people who went into threshing as a business or who had sawmills or some other line that required portable power.

Source： https://www.gutenberg.org/ebooks/7213
Locator：Additional excerpt 32 · Verified：2026-10-19 · Verification：Short excerpt

公版传记；原文逐字取自 Project Gutenberg，仅摘录段落并附全书链接。

This text is in the public domain. The edition and source link are above. Copyright

← Back to the library